HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. Available in 1 gallons and 5 gallon containers.

Features & Benefits:

• Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)

• Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)

• Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured

• Bonds directly to metal

• PVC and ABS plumbing fixtures only

• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks

• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)

• Changes in color from a light sage to an olive green when cured

• Equipped with anti-microbial technology to protect the treated article.

• Rapid drying for a faster time to tile

• Install tile

• brick and stone directly onto membrane

• Exceeds ANSI A118.10 and A118.12

• IAPMO approved

• Lighter color for ease of inspection

• No solvents and non-flammable